Publications

Published Refereed Journal Articles

  1. Grauberger, A., Young, D., & Bandhauer, T. M. (2022). “Off-design performance of an organic Rankine-vapor compression cooling cycle using R1234ze(E).” Applied Energy, 321.

  2. Cole GM, Robbins CA, Grauberger BM, Garland S, Tong T, Bandhauer TM, Quinn JC. (2022). “Optimization of mobile oil and gas produced water treatment unit deployment logistics to achieve economic feasibility.” Resources, Conservation and Recycling (Vol. 181)

  3. Grauberger, A., Young, D., & Bandhauer, T. M. (2022). “Experimental validation of an organic Rankine-vapor compression cooling cycle using low GWP refrigerant R1234ze(E).” Applied Energy, 307.

  4. Robbins, C. A., Du, X., Bradley, T. H., Quinn, J. C., Bandhauer, T. M., Conrad, S. A., Carlson, K. H., & Tong, T. (2022). “Beyond treatment technology: Understanding motivations and barriers for wastewater treatment and reuse in unconventional energy production.” Resources, Conservation and Recycling (Vol. 177).

  5. Hollis, J., Sharar, D. J., & Bandhauer, T. M. (2021). “Effect of Phase Change Material on Dynamic Thermal Management Performance for Power Electronics Packages.” Journal of Electronic Packaging, 143(4).

  6. Anderson, C., Richey, J., Fish, M., & Bandhauer, T. M. (2021). “Peak Temperature Mitigation of a Multimicrochannel Evaporator Under Transient Heat Loads.” Journal of Electronic Packaging, 143(4).

  7. Hejase, C. A., Weitzel, K. A., Stokes, S. C., Grauberger, B. M., Young, R. B., Arias-Paic, M. S., Kong, M., Chae, S., Bandhauer, T. M., Tong, T., Herber, D. R., Stout, S., Miara, A., Huang, Z., Evans, A., Kurup, P., Talmadge, M., Kandt, A., Stokes-Draut, J. R., Macknick, J., Borch, T., Dionysiou, D. D. (2021). “Opportunities for Treatment and Reuse of Agricultural Drainage in the United States.” ACS ES&T Engineering.

  8. Simon, J. R. & Bandhauer, T. M. (2021). “An experimentally validated evaporative phase change heat transfer model for low mass flux applications using R134a in plate heat exchangers.” International Journal of Refrigeration, 131, 604–614.

  9. Hobby, D., Walker, T., Rattner, A., Jacobsen, C., Sherrer, D., & Bandhauer, T. M. (2021). “Comparison of Experimental and Computational Heat Transfer Characterization of Water Jet Impingement Array with Interspersed Fluid Extraction.” Heat Transfer Engineering, 42(6), 549–564.

  10. Hoke, J. R., Burk, B. E., Kotovsky, J., Hamilton, J., Fontejon, P., & Bandhauer, T. M. (2021). “HIGH FLUX BOILING HEAT TRANSFER ENHANCEMENT USING TRIANGULAR SHAPED VERTICAL WALSS IN TWO-PHASE MICROCHANNEL HEAT EXCHANGERS.” Heat Transfer Research (Vol. 52, Issue 7).

  11. Robbins, C. A., Carlson, K. H., Garland, S. D., Bandhauer, T. M., Grauberger, B. M., & Tong, T. (2021). “Spatial Analysis of Membrane Distillation Powered by Waste Heat from Natural Gas Compressor Stations for Unconventional Oil and Gas Wastewater Treatment in Weld County, Colorado.” ACS ES&T Engineering, 1(2), 192–203.

  12. Robbins, C. A., Grauberger, B. M., Garland, S. D., Carlson, K. H., Lin, S., Bandhauer, T. M., & Tong, T. (2020). “On-site treatment capacity of membrane distillation powered by waste heat or natural gas for unconventional oil and gas wastewater in the Denver-Julesburg Basin.” Environment International, 145.

  13. Burk, B. E., Grumstrup, T. P., Bevis, T. A., Kotovsky, J., & Bandhauer, T. M. (2019). “Computational examination of two-phase microchannel heat transfer correlations with conjugate heat spreading.” International Journal of Heat and Mass Transfer, 132, 68–79.

  14. Bevis, T., B. Burk, J. Hoke, J. Kotovsky, J. Hamilton, and T.M. Bandhauer (2018). “Flow Boiling in a High Surface Area Microchannel Array for High Flux Laser Diode Cooling.” Heat Transfer Research, 50 (14).

  15. Young, D., Gibson, S., and Bandhauer, T. M. (2018). "Working Fluid Selection and Technoeconomic Optimization of a Turbocompression Cooling System." ASME. J. Thermal Sci. Eng. Appl. December 2018; 10(6): 061017.

  16. Paudel, A., & T. M. Bandhauer (2018). “Technoeconomic analysis of waste heat recovery systems for Wet-Cooled Combined Cycle Power Plants.” Applied Thermal Engineering, 143: 746-758.

  17. Garland, S., J. Noall, and T. M. Bandhauer (2018). “Experimentally Validated Model of a Turbo-Compression Cooling System for Power Plant Waste Heat Recovery.” Energy, 156(1): 32-44.

  18. Adler, J., and T. M. Bandhauer (2017). “Performance of a High Temperature Diesel Engine.” Journal of Energy Resources Technology, 139(6): 062203-1 to 062203-13.

  19. Westhoff, K., and T. M. Bandhauer (2016). “A Multi-Functional Electrolyte for Lithium-Ion Batteries: Part I. Non-Boiling Electrochemical Performance.” Journal of the Electrochemical Society, 163(9): A1903-A1913.

  20. Westhoff, K., and T. M. Bandhauer (2016). “A Multi-Functional Electrolyte for Lithium-Ion Batteries: Part II. Boiling Electrochemical Performance.” Journal of the Electrochemical Society, 163(9): A1914-A1919.

  21. Bandhauer, T. M., T. Fuller and S. Garimella (2015). "Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies: Part I. Side Cooling." Journal of the Electrochemical Society, 162(1): A125-A136.

  22. Bandhauer, T. M., T. Fuller and S. Garimella (2015). "Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies: Part II. Edge and Internally Cooling." Journal of the Electrochemical Society, 162(1): A136-A148.

  23. Bandhauer, T. M., S. Garimella , and T. F. Fuller (2014). "Temperature Dependent Electrochemical Heat Generation in a Commercial Lithium-Ion Battery." Journal of Power Sources, 247(1): 618-628.

  24. Bandhauer, T. M., and S. Garimella (2013). "Passive, Internal Thermal Management System for Batteries using Microscale Liquid-Vapor Phase Change." Applied Thermal Engineering, 61: 756-769.

  25. Bandhauer, T. M., T. F. Fuller, and S. Garimella (2011). "A Critical Review of Thermal Issues in Lithium-Ion Batteries." Journal of the Electrochemical Society, 158(3): R1-R25.

  26. Agarwal, A., T. M. Bandhauer, and S. Garimella (2010). "Measurement and Modeling of Condensation Heat Transfer in Non-Circular Microchannels." International Journal of Refrigeration, 33(6): 1169-1179.

  27. Bandhauer, T. M., A. Agarwal, and S. Garimella (2006). "Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels." Journal of Heat Transfer, 128(10): 1050-1059.

Refereed Proceedings/Transactions

  1. Hobby, D., T. Walker, A. Rattner, C. Jacobsen, D. Sherrer, and T. M. Bandhauer (2018). “Comparison of Experimental and Computational Heat Transfer Characterization of Water Jet Impingement Array with Interspersed Fluid Extraction.” I6th Micro and Nano Flows Conference, Atlanta, GA.

  2. Hobby, D., D. Sherrer, C. Jacobsen, and T. M. Bandhauer, (2018). “Thermal Performance of Micro-Jet Impingement Device with Parallel Flow, Jet-Adjacent Fluid Removal.” Paper ICNMM2018-7664. Proceedings of 15th International Conference on Nanochannels, Microchannels, and Minichannels, Dubrovnik, Croatia.

  3. Hoke, J., J. Kotovsky, P. Fontejon, J. Hamilton, and T. M. Bandhauer (2018). “Heat Transfer Enhancement in Compact Phase Change Microchannel Heat Exchangers for High Flux Laser Diodes.” Paper ICNMM2018-7665. Proceedings of 15th International Conference on Nanochannels, Microchannels, and Minichannels, Dubrovnik, Croatia.

  4. Paudel, A., and T. M. Bandhauer, (2018). “Techno-economic Study of Waste Heat Recovery Strategies for Natural Gas Combined Cycle Power Plants.” Paper TFEC-2018-21619, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

  5. Young, D., and T. M. Bandhauer, (2018). “Technoeconomic Optimization of Turbo-compression Cooling Systems Driven by Engine Coolant Waste Heat.” Paper TFEC-2018-21605, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

  6. Paudel, A., J. Richey, and T. M. Bandhauer, (2018). “Determining the Apparent Cost of Water for Thermoelectric Power Plants.” Paper TFEC-2018-21609, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

  7. Garland, S., A. Grauberger, J. Simon, D. Young, K. Eisemann, R. Fuller, J. Noall, J. Shull, R. Sami, M. Reinke, L. Gabbey, and T. M. Bandhauer, (2018). “Experimental Investigation of a Waste Heat Driven Turbo-Compression Chiller.” Paper TFEC-2018-21617, Proceedings of the 3rd Thermal and Fluid Engineering Conference, Fort Lauderdale, FL.

  8. Gibson, S., D. Young, and T. M. Bandhauer (2017). “Technoeconomic Optimization of Turbocompression Cooling Systems.” Paper IMECE2017-70934, International Mechanical Engineering Congress and Exposition, Tampa, FL.

  9. Garland, S., T. M. Bandhauer, and J. Noall (2017). “Dry Air Turbo-Compression Cooling.” Paper TFEC-IWHT2017-18302, Proceedings of the 2nd Thermal and Fluid Engineering Conference, Las Vegas, NV.

  10. Paudel, A., and T. M. Bandhauer, (2017). “Simulation of NGCC Power Plant at Elevated Temperatures.” Paper TFEC-IWHT2017-18345, Proceedings of the 2nd Thermal and Fluid Engineering Conference, Las Vegas, NV.

  11. Westhoff, K., and T. M. Bandhauer (2016). “Multi-Functional Electrolyte for Thermal Management of Lithium-Ion Batteries.” Paper 2016-59460, Proceedings of the 14th Fuel Cell Science, Engineering, and Technology Conference, Charlotte, NC.

  12. Bandhauer, T. M., and S. Garland (2016). “Dry Air Turbo-Compression Cooling.” Paper 2016-59152, Proceedings of the ASME 2016 Power and Energy Conference, Charlotte, NC.

  13. Bevis, T., and T. M. Bandhauer (2016). “High Heat Flux Boiling Heat Transfer for Laser Diode Arrays.” Paper ICNMM2016-7947, Proceedings of ICNMM 2016.Washington, DC.

  14. Bandhauer, T. M., A. Agarwal, and S. Garimella (2005). “Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels.” Proceedings of ICMM2005 Toronto, ON.

  15. Garimella, S., A. Agarwal, and T. M. Bandhauer (2005). “Channel Size Based Measurement Techniques for Condensation Heat Transfer Coefficients in Mini- and Micro-Channels.” Proceedings of IMECE 2005 Orlando, FL.

  16. Garimella, S. and T. M. Bandhauer (2001). “Measurement of Condensation Heat Transfer Coefficients in Microchannel Tubes.” Proceedings of IMECE 2001 New York, NY.

Issued Patents

  1. Bandhauer, T. M., Multi-functional electrolyte for thermal management of lithium-ion batteries, patent number 9,947,961, April 17, 2018.

  2. Bandhauer, T. M., R. J. Deri, J. W. Elmer, J. Kotovsky, and S. Patra, High flux diode packaging using passive microscale liquid-vapor phase change, patent number 9,768,584, September 19, 2017.

  3. Bandhauer, T. M., and J. C. Farmer, Battery management systems with thermally integrated fire suppression, patent number 9,704,384, July, 11 2017.

  4. Bandhauer, T. M., and J. C. Farmer, Li-ion battery thermal runaway suppression system using microchannel coolers and refrigerant injections, patent number 9,490,507, November 8, 2016.

  5. Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent number 9,413,017, issued August 9, 2016.

  6. Farmer, J. C., and T. M. Bandhauer, Battery management system with distributed wireless sensors, patent number 9,267,993, February 23, 2016.

  7. Farmer, J. C., and T. M. Bandhauer, Energy storage management system with distributed wireless sensors, patent number 9,209,501, December 8, 2015.

  8. Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent number 8,691,462, issued April 4, 2014.

  9. Krause, C. L., K. H. Nguyen, B. Balasubramanian, Y. Lin, J. Valensa, M. Reinke, M. G. Voss, and T. M. Bandhauer, Process and apparatus for thermally integrated hydrogen generation system, patent number 7,964,176, issued June 2, 2011.

  10. Bandhauer, T. M., M. J. Reinke, and J. Valensa, High temperature fuel cell system with integrated heat exchanger network, patent number 7,858,256, issued December 28, 2010.

  11. Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent number 7,520,908, issued April 21, 2009.

  12. Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent number 7,520,907, issued April 21, 2009.

  13. Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent number 7,494,516, issued February 24, 2009.

  14. Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, and D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent numbers 7,494,518, February 24, 2009.

Pending Patents

  1. Bandhauer, T. M., T. P. Grumstrup, and D. R. Hobby, Method and apparatus for cooling integrated circuits, patent application 20170250123, August 31, 2017.

  2. Bandhauer, T. M., and T. P. Grumstrup, Ultra-efficient turbo-compression cooling, patent application 20170045272, February 16, 2017.

  3. Bandhauer, T. M., Thermally integrated concentrating solar power system with a fluidized solid particle receiver, patent application 2015345480, March 4, 2014.

  4. Baumann, T. F., J. R. Satcher, J. C. Farmer, and T. M. Bandhauer, Adsorption cooling system using carbon aerogel, patent application 20130283847, October 31, 2013.

  5. Baumann, T. F., J. R. Satcher, J. C. Farmer, and T. M. Bandhauer, Adsorption cooling system using metal organic frameworks, patent application 20130283846, October 31, 2013.

  6. Yin, J., M. J. Wilson, S. B. Memory, S. J. Collier, and T. M. Bandhauer, Refrigeration system having heat pump and multiple modes of operation, patent application 20080302113, December, 11, 2008.

  7. Wilson, M. J., S. B. Memory, J. Yin, J. P. Wattelet, S. J. Collier, K. Traeger, and T. M. Bandhauer, Heat exchange system for vehicles and method of operating the same, patent application 20080245503, October 9, 2008.

  8. Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent application 20050241232, November 3, 2005.

  9. Bandhauer, T. M., M. G. Voss, N. Siler, M. McGregor, and M. J. Reinke, Fuel humidifier and pre-heater for use in a fuel cell system, patent application 20050221137, October 6, 2005.

  10. Reinke, M. J., J. Valensa, T. M. Bandhauer, N. Siler, M. G. Voss, M. McGregor, D. C. Granetzke, Highly integrated fuel processor for distributed hydrogen production, patent application 20050217180, October 6, 2005.

Theses and Dissertations

  1. E.J. Markey (2022). “Economic impact of thermal energy storage on natural gas power with carbon capture in future electricity markets.” M.S. Thesis, Colorado State University, Fort Collins, CO, USA, Summer 2022.

  2. A.M. Grauberger (2022). “Experimental investigation of an advanced organic Rankine cycle vapor compression chiller.” Ph.D. Dissertation, Colorado State University, Fort Collins, CO, USA. Spring 2022.

  3. D.R. Hobby (2022). “Generalized pressure drop and heat transfer correlations for jet impingement cooling with jet adjacent fluid extraction.“ Ph.D. Dissertation, Colorado State University, Fort Collins, CO, USA. Spring 2022.

  4. N.R. Roberts (2021). “Modeling and design of a power boosted turbo-compression cooling system.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2021.

  5. S. Colosimo (2021). “Waste heat driven cooling at beef processing facilities.” M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2021.

  6. Z.H. Gilvey (2021). “Investigation of liquid cooling on M9506A high density Keysight AXIe chassis.” M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2021.

  7. J. R. Hollis (2021). “Effect of phase change material on dynamic thermal management performance for power electronics packages.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2021.

  8. J.J. Richey (2020). “Transient experimentation and modeling of a multi-microchannel evaporator.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Spring 2020.

  9. J. Hoke (2020). “Heat transfer enhancements in two-phase microchannel heat exchangers for high heat flux electronics.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Spring 2020.

  10. J.R. Simon III (2019). “Plate frame and bar plate evaporator model validation and volume minimization.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2019.

  11. L. Giugliano (2019). “Technoeconomic analysis of a steam generation system with carbon capture.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2019.

  12. D.N. Young (2018). “Technoeconomic optimization and working fluid selection for an engine coolant driven turbo-compression cooling system.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2018.

  13. A. Paudel (2018). “A techno-economic study on the waste heat recovery options for wet cooled natural gas combined cycle power plants.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2018.

  14. B.E. Burk (2018). “A computational examination of conjugate heat transfer during microchannel flow boiling using finite element analysis.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2018.

  15. S.D. Garland (2018). “Waste heat driven turbo-compression cooling.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Spring 2018.

  16. J. E. Adler (2017). “Waste heat recovery from a high temperature diesel engine.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2017.

  17. K. A. Westhoff (2016). “A multi-functional electrolyte for lithium-ion batteries.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Summer 2016.

  18. T.A. Bevis (2015). “High heat flux phase change thermal management of laser diode arrays.“ M.S. Thesis, Colorado State University, Fort Collins, CO, USA. Fall 2015.